Pokemon Lid Coaster (Lugia)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design has a 120mm diameter and was printed on a multi-material system using 5 colors.
- Ocena
- 5 / 5
- Polubienia
- 190
- Pobrania
- 281
- Wydruki
- 3
- Wyświetlenia
- 2987
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like this design but are unable to print in multiple colors, please consider purchasing one from my etsy store. I provide a cork backing to protect your table surface.
https://www.etsy.com/listing/1383367012/pokemon-coaster-manhole-cover-style
When opening in PrusaSlicer, select all files and click Open. You will see a prompt to consider these files as a multi-object print, please select yes. If you ever see a prompt to convert to inches, select NO.
Print with a .2 layer height and for best results, use a first layer extrusion width of 0.4 on a textured build plate. Please do not use any other layer height since I implement a low-waste, yet blended color design process.
Filaments Used (links provided)
PLA | PETG |
| Atomic Gunmetal Gray | Prusament Anthracite Gray |
| Prusament Azure Blue | Hatchbox Lake Blue |
| Hatchbox Baby Blue | Hatchbox Baby Blue |
| Prusament Lipstick Red | Hatchbox Red |
| Hatchbox White | Hatchbox White |
Some of these links are affiliate links and I do get small compensation when you make a purchase. There is no additional cost to you when you use my links. :)