1 / 2
Lorex Fusion DVR mounts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts to hang a Lorex DVR, with open sides for airflow.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed up these brackets to free up some desk space and get it tucked underneath the desk. I printed with supports in the larger access holes, then ran a drill bit through the other holes to clean them up. I was just screwing into wood. You will want a button-head or flat-head screw. I mounted them close enough together that there was just a bit of tension on the Lorex unit itself to keep it in place. Recommended to be printed in PETG for a little extra strength (DVR isn't heavy, but is expensive!)