Jumper T-Pro Gamepad Style Gimbal Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Jumper T Pro Gimbal protector by FPVian to accommodate wider gamepad style stick ends. I increased the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Remix of the Jumper T Pro Gimbal protector by FPVian to accommodate wider gamepad style stick ends.
I increased the diameter of the stick end hole(up to 18mm) to fit the FrSky Vantac Umbrella Style gimbal stick ends https://www.racedayquads.com/products/frsky-vantac-umbrella-style-cnc-aluminum-transmitter-stick-ends-m3-or-m4-choose-size-color?variant=29066378608753
I attached a screenshot of my Cura 3.2.1 setting for the Anycubic Mega S
Print Settings
Printer Brand:
Anycubic
Printer:
Mega S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament: Tecbears PLA
Notes:
I used Tecbears brand pla on the print seen in the pics but I wouldn't recommend using this PLA. I'm not sure if the roll I got was just from a bad batch but out of the box it was brittle, constantly got tangled and hung up on the spool and in general I just haven't had much luck with this brand. This print actually came out perfect(probably the only one that has) so I didn't bother running another print.
Category: R/C Vehicles