1 / 2
Vice soft jaws
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of magnetic soft jaws for a 4" vice (103mm) There are 2 version, one plain and another with V grooves
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 368
- Wydruki
- 7
- Wyświetlenia
- 2046
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 7) (Komentarze: 9)Remiksy (1)Kolekcje (147)Powiązane
A set of magnetic soft jaws for a 4" vice (103mm) There are 2 version, one plain and another with V grooves
Print instructions
Printed in PETG at a layer height of 0.2mm at 50% fill. It could be printed in PLA.
Magnets are 10mm x 2.75mm press fitted into the recesses.