Thicc Switches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tried to make them slide better and made the clips thicker to avoid breakage. Tension a rubber band to fix reset sliding
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
These were snapping on me while trying to install or take out so I strengthened the clips a bit. Added a small bump on the underside like the original switches to help with movement. This unfortunately didn't fix the reset button movement, but a small rubber band tripled up to replace the spring did. l also used a flap I remixed https://www.thingiverse.com/thing:5799151
Printed in PETG Transparent Ultramarine Blue Prusament, .2mm, 15%infill, 240/85 first layer and 250/90 for the rest. I printed the top sides flat on the textured bed with monotonic bottom infill which gives a nice light catching effect.