Black Diamond Storm 450 LED Headlamp Latch Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Black Diamond Storm 400 adapted to the 450 series
- Ocena
- 4,5 / 5
- Polubienia
- 21
- Pobrania
- 1087
- Wydruki
- 1
- Wyświetlenia
- 4341
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
I modified the 400 series latch file to match the 450 series.
Printed on Ender 3v2 with brim and support touching buildplate, overhang angle 59°. Layer height 0.16mm and infill 100%. I set the supports touching the print and removed it using sharp blade.
Unlocking the hinge consisted in gentle knocking out a metal pin with a needle and a hammer but be careful when removing because one side of the pin is knurled. After replace I put the headlamp in the water for half an hour, after that time the toilet paper inside was completely dry. If you need to mod, I've included the step file.
If your product is under warranty (3 years) write to Black Diamond support, after report they sent me a completely new back cover in 3 days