1 / 5
Simple Desk Monitor Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a simple desktop monitor stand.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 806
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (22)Powiązane
One of the first things I designed when learning Fusion 360. It's a simple desktop monitor stand for my iMac.
Print the base and 4 legs and 4 pegs. Pegs go into the hole in the legs and then into the base with some gorilla glue.
Make sure to slice/print with a pretty solid infill amount for weight and strength. I also chose an infill pattern I liked and left the top layer exposed for a textured looking top (it also creates more friction with what's on it).
Category: Office