1 / 5
Turntable Hinge for AT-LP120
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I accidentally threw away the hinges for my turntable's dust cover so I made these replacements. It was a bit…
- Ocena
- 4,5 / 5
- Polubienia
- 16
- Pobrania
- 260
- Wydruki
- 2
- Wyświetlenia
- 1363
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (24)Powiązane
I accidentally threw away the hinges for my turntable's dust cover so I made these replacements. It was a bit expensive to buy 2 hinges online so I designed and printed these.
I have at the AT-LP120 USB, but it should fit these models:
- AT-LP120-USB
- AT-LP120BK-USB
- AT-PL120
Please let me know if you use this model!
Some printing notes:
- For the top part of the hinge I just printed with 0.3mm and base-plate-only supports. I used a brim and printed it standing up with the hinge hole up top.
- For the bottom part I printed 0.15mm and no supports.
- you probably have to rotate the STL file
Some assembly notes:
- Just needs one M3x20 screw and one M3 nut
- make sure to orient the top part of the hinge like you see in the pictures - the hinge will screw together the other way but the lid won't fit right
Category: Music/Electronics