1 / 2
ID / security pass card holder - print in place - NEW VERSIONS ADDED — zdjęcie 1
1 / 2

ID / security pass card holder - print in place - NEW VERSIONS ADDED

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ID / security pass card holder with a print-in-place hinge. Fast to print with standard or wider tolerance design.

Ocena
4,654 / 5
Polubienia
402
Pobrania
3737
Wydruki
28
Wyświetlenia
10 764
Oceny
26

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

Thanks for downloading my model. If you like it and would like to help fuel my designs I'll welcome a coffee donation :D thanks!

https://ko-fi.com/supermatt

The clear plastic card holders we use at work just don't last. I designed an ID / security pass card holder with a hinge to flip closed over 2-3 cards depending on thickness. Fits standard credit card size - about 86 x 54 mm. Good for IDs, public transport cards, security cards at work etc.

Uploaded multipart models in case you have an MMU too.

I printed at 0.2mm layer height with a 0.4mm nozzle, 3 perimeters and 10% infill on my MK3S in 45 mins. 

Thanks to @gr8hifi_3303771 who pointed out the hexes one side weren't quite connecting - I've made a new version, both with an extra layer top and bottom to help with some weak points around the hinges and clip attachment. Also added a stripes version!

Tagi