1 / 6
Wheelchair AirTag Mount - 25mm/1Inch Tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, yet sturdy AirTag mount for a wheelchair or any other tube.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 761
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
Tips for printing:
- Print it solid
- Use M2 screws and threaded inserts
- 4x M2x4mm screws
- 4x M2x16mm screws
- 8x M2x3x3mm Brass threaded inserts.
- Use 6 5mm lengths of 1.75mm filament to line up the two halves of the rear loop piece and then super glue them together
