Purge bucket for GeeeTech A30T.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Purge bushing for A30T. I used different files but didn't want to unscrew the bolts on the Z-axis, so I matched the…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Purge bushing for A30T. I used different files but didn't want to unscrew the bolts on the Z-axis, so I matched the X-axis motor cover with a 10mm limit switch offset and a basket. I changed the nozzle to stainless, but it is longer than the standard one. Therefore, I dropped the basket below. I think that if you use a standard nozzle, then you just need to make the silicone insert above. Good luck to all.
Thanks https://www.thingiverse.com/thing:4731557 https://www.thingiverse.com/thing:4182279
Print Settings
Printer:
Geeetech A30T
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
25
Filament:
FD Plast PETGBlack
Category: Other