1 / 4
M249 or minimi classic army airsoft magazine lock latch — zdjęcie 1
1 / 4

M249 or minimi classic army airsoft magazine lock latch

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hello Long avaited part - a working and fitting magazine lever wnich works with classic army m249!

Ocena
0 / 5
Polubienia
12
Pobrania
195
Wydruki
0
Wyświetlenia
1849
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Hello

Long avaited part - a working and fitting magazine lever wnich works with classic army m249!

Just plug and play - if you want to tweak something , feel free to modify the .STEP file I attached.

Things I recommend to modify in case of problems - hole size for the rod and heigh of the "tooth" keeping mag in place .

If you want to customize it more - make the lever shorter to avoid bending/damage..

Filaments recommended: any , PLA might work fine, just dont leave gun on the hot sun . PETG/ABS/AnythingStronger will be good.

Print instructions

Print veritically with supports - the lever being closer to the ground. I used 0.15mm layer due to it being the strongest layer according to reserach and tests.