PiP Toilet Paper Holder Quick Change
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a print-in-place quick change toilet paper holder for everyone who doesn't want to assemble anything.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 812
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- GNU General Public License v2.0
This is a print-in-place version of rAthus' “Minimalist Quick Change Toilet Paper Holder”. I looked at his design and modified it to be able to be printed in place with no assembly required. I would still suggest everyone to use the original file by rAthus though, since it is very little assembly and it requires much less filament and print hours. I have used a Wall Line Count of 12 to make the bridges and overhangs sturdier, worked out quite well on the first attempt. Print took around 14 hours in total and used 127gr of filament. Make sure to level your bed before printing. It doesn't have the adjustable drill holes in the back for more rigidity, right now they are spaced 90.5mm apart. You can change these dimensions, if you wish, in Onshape by editing the ScrewHoles variable (anything between 10-100mm should work):
Material:
Eryone White PLA
Bed Temp:
60°C
Nozzle Temp:
215°C
Infill Density:
30% Tri-Hexagon
Layer Height:
0.15mm/ 0.2mm works too
Print Speed:
45mm/s
Wall Line Count:
12
Z-Hop On
Adhesion Type:
Skirt
No supports required.