Tray For Stuff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed and modeled this tray to store bits and bobs that were just laying around.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed and modeled this tray to store bits and bobs that were just laying around, this gives them a home so they are easy to find and wont be damaged.
The inserts slot in and hold securely, if they don't then you could try a bit of glue. I chose to do inserts because the whole thing would have taken too long to print (because I cant do long prints with my current circumstances).
Please ignore the different colour plastic, i ran out of the matte gray so to finish it i had to use some blue.
If you have any questions feel free to leave a comment and I will try to respond. Thank you for looking.