Catnip insert for Cat Food Hunting Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a catnip insert for the Cat Food Hunting Toy by moneybunny.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This insert will allow you to put some catnip in moneybunny's cat food hunting toy.
I designed it so the cats can still play and enjoy the toy after having their treats.
You'll have the choice between 2 depths : the one you see on the photos is the catnip_insert_shallow. I didn't want to put too much catnip as I like changing it regularly. But you have a deep model version if you prefer.
The dimensions are purposely tight as I wanted it to be hard to remove as my filament was slightly humid and I was dealing with a slight underextrusion.
Print settings:
Material: white PETG
Layer height: 0.12mm but any is fine
Infill: 10%
Support: none
Temp: Nozzle 235; Bed 75
Fan speed: 33%
Speed: 40mm/s
Time required: 1H30Mn
Filament used: 6g