RodGreaser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps you to grease your rods from all sides easily, evenly and without smearing it everywhere.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 188
- Wydruki
- 8
- Wyświetlenia
- 1171
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Helps you to grease your rods from all sides easily, evenly and without smearing it everywhere. You can also use it for degreasing / cleaning using isopropanol instead of grease.
Usage:
cut a small piece of paper from a coffee filter (see pictures). Insert ends into clips, grab a rod to adjust the footprint accordingly and grease the coffee filter gently(see pictures). Now swipe the grease across your rods. Move the bearings back and forth and remove grease overhangs if you have applied to much.
Please do not forget to post a make if you are using it. Feel free to remix, I attached the f3d file for easy mixing. Happy printing!
Demo:
Print instructions
Notes:
would recommend PETG, not sure if PLA breaks
Post-Printing: break clips/springs free carefully use a small flat screw driver for breaking free the clips