Mendel90 BLTouch X-carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Probe finally arrived and fits perfectly fine. Needs 2 M3 nuts and 2 M3 screws. Guide the ribbon cable along the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Probe finally arrived and fits perfectly fine.
Needs 2 M3 nuts and 2 M3 screws. Guide the ribbon cable along the existing X-carriage cable. You may have to crimp/solder the connectors after passing it through the sidewall, it will likely not fit otherwise.
Offsets should be ~ X -49.5 Y -8.1. With the stock extruder and nozzle, Z should be around -1.2, but you'll have to adjust that one yourself to be sure.
The "flat" version has the bearing mounts shortened, as there's no need for the bearings to be seated so tightly, in fact, it makes alignment harder. The zipties still hold them securely.
Category: 3D Printer Parts