Dell Inspiron 14-5410 2-in-1 laptop case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU case for Dell Inspiron 14-5410
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 1728
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This 4 part case fits Dell Inspiron 14-5410 2-in-1 laptop. The top and bottom halves glue together with crazy glue either before or after installation. If you glue the halves together first it is difficult (but possible) to stretch the case over the laptop. If you glue the halves together after installed on the laptop there is a chance the glue will seep through the crack onto your laptop.
I printed it with TPU. Parameters:
Rotate as necessary to obtain flat side down.
Supports: Yes As TPU supports are notoriously hard to extract, I increased the clearance on sides, top and bottom.
.2mm layer height, 3 layers top and bottom, 2 walls, infill 20% (gives a soft squishy feel)
Speed: 30-40 mm/s
Retraction: whatever works for your printer
The .scad file is included. Sorry, the coding is a mess.
