Flsun v400 Tower Mount Clip Source
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flsun v400 Tower Mount Base part with editable parametric file (step) so you wont need to create from scratch like i did
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 382
- Wydruki
- 1
- Wyświetlenia
- 1122
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
i tried to work with those STL files in Fusion 360 and its next to impossible to work with.
i couldn't found any CAD worthy file for the tower mount, only STL. (and if one exist i couldn't locate one)
so, i took a paper and copy the exact Flsun v400 tower profile shape, loaded it to the CAD and draw the exact thing from scratch.
after 3 test trails, im proud to have a very sturdy tower mount that holds tight perfectly.
so in order for you not to get messy like i did i shared the source step file.
i used it to create a tool holder and it works grate.
i printed it with generic yellow PETG on Flsun v400
print params :
- temp : 230 for first layer 240 for the rest
- speed : 150 mm/s
- retract : 2mm * retract speed 20mm
- NO SUPPORTS
- NO BRIM
- infill : lines 20%
- walls : 3 (optional, but its stronger that way)
- top/bottom layers : 3 / 5 (PTEG tends to be problematic at these speeds so this will keep a top surface nice and neat)