Creality Ender 3 - Raspberry Pi 2/3 + LCD Enclosure Case Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure + LCD mount for Raspberry Pi 2 or 3. Easy print with no supports, includes fan mount, ribbon and switch slots.
- Ocena
- 4,75 / 5
- Polubienia
- 106
- Pobrania
- 802
- Wydruki
- 12
- Wyświetlenia
- 3853
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Remixed from ‘Creality Ender 3 Pro - Raspberry Pi 2/3/4 + LCD Enclosure’ by eoyilmaz, specifically v042 for Pi 2/3. Note:This remix only works for Pi 2/3, not 4.
The original is a really beautiful design. To suit my Pi 3B setup this remix adds a rear fan mount, 2 x ribbon cable slots (DSI screen, Camera), holes for BTT Smart Sensor cable and shutdown switch.
I also retooled the angles at the rear of the case so it prints more cleanly without supports and simplified the way the case fixes to the LCD.
I occasionally need to be able to access my Pi to mess around with GPIO wires, disconnect/reconnect devices or reseat my camera ribbon cable etc. I didn’t relish the thought of having to undo 6 screws (2 front frame screws then 4 little fiddly LCD board mount screws) every time I wanted to get in there. So I modded 3 of the 4 LCD screw mounts to be simple platforms the PCB rests on while the one remaining screw mount is all that’s needed to secure the LCD in position on the case. Then once the two front frame screws go in everything’s still super solid with the added bonus of quicker/easier internal access.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament: eSun PLA+ Magenta
Category: 3D Printer Accessories