1 / 4
Socket org. (metric) V3 (will fit 220mmx220mm print bed)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The first version I uploaded was 207mm wide. On my Ender3 v2 it would not slice. I changed the print bed size, it did…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 1069
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
The first version I uploaded was 207mm wide. On my Ender3 v2 it would not slice. I changed the print bed size, it did slice then, but one side was not able to put the brim down correctly.
I squeezed everything tighter and was able to get 7mm shaved off. So it is now:
207mm x 81mm
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/2i0heSNqmwM
Category: 3D Printing
