1 / 3
Garage Door Adapter for 1st Gen. Ring Alarm Contact Sensor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A resizing of zoltanf's 2nd Gen adaptor to 1st gen that uses gravity to set the contact sensor to open and closed.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 1
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (21)Powiązane
Simply resized zoltznf's (https://www.printables.com/social/1970-zoltanf) version to the gen 2 model to 82mm with to fit the gen 1 sensors.
Note: The higher up the door the sensor is placed the quicker the sensor registers as open. So, if you fancy having your door open a bit put the sensor lower.
Also, I used velcro command strips so I could easily position the sensor and the magnet.