Generic bambulabs 3d printer hotend (based for Rook printer)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've printed a Rook 3D printer, and decided to use my spare bambulabs hotend on it.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 794
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I've printed a Rook 3D printer, and decided to use my spare bambulabs hotend on it. This is for a bowden setup, and as per the stock Rook design uses bed-mounted layer cooling.
This can use either the standard bambu (5V) fan, or using the converter, the a 3010 can be attached.
Rook design is here https://github.com/rolohaun/Rook
My Full 3d Rook re-model is here https://github.com/robandwend/Rook
In action here:
NOTE: Once loaded into slicer, use the ‘split to objects’ to separate out the various components.
Supports are required.