SV02 Dual Gear Direct Drive Extruder Mount With ADXL and BLtouch Mount.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of MrHasBean's Direct Drive mod but with additional space to accommodate the Creality style dual gear…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix of MrHasBean's Direct Drive mod but with additional space to accommodate the Creality style dual gear extruders. I also added the ADXL mount from shiang91221 onto the front for anyone utilizing it for input shaping.
This can be a bit of a bear to assemble so be prepared, tight spaces and such. I recommend starting with the 2nd extruder, then mounting the first. Also the connections are a little off the mark for the stock extruder still. You can remove the hot ends Bowden fittings and run PTFE straight down into it. It works perfectly this way...Otherwise I will be updating the fittings with correct placement in the future.
Print Settings
Printer:
Sovol SV02
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20% Gyroid
Filament:
Generic PETGBlack
Category: 3D Printer Extruders
