Oil drop collector for Technika Rangehood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a part I designed to replace the original Oil Drop Tray/Collector for Technika Rangehood model FHEE26A9S-2
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
This is a part I designed to replace the original Oil Drop Tray/Collector. The dimensions are slightly off from the original, but it seems to still function the same.
Original Part Number: 1673496
Original dimensions: 162mm long, 30mm deep
This model's dimensions: 160.40mm long, 29.20mm deep.
Recommended to print with heat-resistant materials such as PETG, ABS, PC. It probably works best to print in a transparent material so you can at least see the oil level even though it is not fully clear.
In this example, I printed using Polymaker Polylite Polycarbonate Transparent.
Print Settings:
Layer Height: 0.20mm
Infill: 15%
Supports: Support on build plate only (to support the side handles). Do not enable support on the sliding handle part, as it is difficult to remove the support and you may snap off parts of the model.