LiPo Adapter for internal resistance measurement (YR-1030)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to use the YR-1030 internal resistance measuring tool with my LiPo batteries. For this you need to access the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to use the YR-1030 internal resistance measuring tool with my LiPo batteries. For this you need to access the cells directly, which is impossible using the small balancer connector.
Therefore i designed this adapter. You can then easily access all cells using the nickle trips.
What you will need:
- 8mm Nickle strips (the same ones used for spot soldering of Li-Ion batteries)
- female balancer cable
- Cut 5 5mm long pieces from the nickle strip
- Cut the cables from the balancer to the right length
- Solder the cables to the nickle strips
- Push the nickle strips into the printed part
- Secure them with a drop of hot glue
Tips for printing:
When printing the version with the letters for multi-color printing (on a single extruder), print it with the labels down for minimal waste. Removing supports can be a little fiddly.
When printing the version without the letters, print it on the right side (when looking at it from the top), this way removing supports it super easy.
Enjoy!
Category: Electronics