Armattan Marmotte DJI HD / Vista camera mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi there! As i tried mounting the Caddx Vista-camera (identical to the one from the original DJI HD combo), i realized…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Hi there!
As i tried mounting the Caddx Vista-camera (identical to the one from the original DJI HD combo), i realized i would need to have some kind of spacers. Also i wasn't too fond of the little arms to hold the camera.
Couldn't find what i was looking for on here, so i designed on myself. Printed in TPU. I made the holes a little smaller than M3, so i just pushed to mount to the titanium part and drilled the screw through the TPU. This way it was mounted quite nicely. However you can also use a longer screw, and counter it with a nut for the 2 screws in the back at least.
Category: R/C Vehicles