Kobalt hex bit driver case inset lid add-on.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnet retained lift out lid for inside Kobalt 1/4" driver bit cases. And mount brackets.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was basically my first modeling project for the printer, and a big part of what justified finally getting the printer!
Wanted to build a little socket set for part of a kit to go with a 3/8" impact driver in my truck. Needed a way to keep them all in their side of the Kobalt hex driver kit box that I was re-purposing.
Supports have captive magnets, and are intended to screw in to the case corners. Magnets press fit into the lid and the support brackets.
Forgive the rough finish in my pics, I had pillowing and heat issues in some of my first printings of flat parts… Took me a while because of this project, to work that out.
Here it is in action;