HEPA Nevermore Duo V5 Lid (HEPA Filter addon) - source included
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement lid to mount a 80x40x15 HEPA filter to a Nevermore duo
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 109
- Wydruki
- 4
- Wyświetlenia
- 1656
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement lid to add a HEPA filter (80x40x15) to a Nevermore Duo V5.
If you have a 3d printer, you should use a filter (HEPA + active coal). If you don't know why, please read carefully the part of the nevermore project with all the information about the dangerous fumes (!!!).
macadocious showed on his make how blue ASA effects the filter (thank you for the pictures). You can see why it is important to have such a filter. Top (used), bottom (new).
Airflow
- I tested the airflow with and without the HEPA-filter. There wasn't a big difference.
- I use 2x24V fans with a high static pressure.
- The big impact on the airflow is the active coal in the chamber (not the HEPA-filter)
Example HEPA Filters
- Aliexpress (1)
- Aliexpress (2)
- Just search for “vacuum cleaner filters hepa chuwi v3 ilife x5”
- The dimensions must be 80x40x X (X should be 15, but 20 etc. should work too
Print settings
- Standard PETG or PLA settings
- I printed it with 0.6mm nozzle on 0.2 - 0.48mm (variable layer height)
- Here is only the file for the “lid”. You need all the other files from the nevermore project (duo v5)
Disclaimer
- Work in Progress - if you find any issues please write a PM so I can fix it
- V1 - first release at January 2023. It works for me now over 1 week (24/7) in my enclosure without any problems so far.
ToDo / Future plans (coming soon)
- Fan-holder with different magnet inserts
- Fan-holder with different fan-cable routing