AtomRC Dolphin ESC Cover Weather Safe/Winter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Atomrc Dolphin ESC cover (low drag + high airflow) by Aspir3 is a fantastic esc cover and keeps the esc icy cool,…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Atomrc Dolphin ESC cover (low drag + high airflow) by Aspir3 is a fantastic esc cover and keeps the esc icy cool, however when landing in wet grass, or worse, snow, you get an esc bay full of water or packed with snow. Not ideal.
This remix has much much less cooling, but still has a small inlet forsome air, and a respectable exhaust. If you cut open your wire hole that goes from the main bay to the esc bay a bit, and have a scoop installed in the main intake of the craft, you will get some air movement from the main cabin out through the exhaust, as well as a bit of air from the small intake on this cover to keep your ESC from cooking itself. The exhaust is situated such that unless you get spun around, you wont get snow packed in while landing.
This is not ideal for hot summer months or warm climates. Personally, when its warm out, I install Atomrc Dolphin ESC cover (low drag + high airflow) by Aspir3, but during the cold wet winter and spring, I will be using this.
Print in the uploaded orientation out of petg, no supports needed.
Category: R/C Vehicles