BK-2 Gunboat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a model of a BK-2 Gunboat requested by a friend.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Here is my model of a BK-2 armored Russian gunboat that was requested by a friend. It is modeled at 1:43 scale.
It is assembled from 5 parts, or 4 parts if you don't want the underwater section. The turret rear gun and gun mount should all fit onto the main portion of the boat without needing any glue or anything. The lower hull will need to be glued on if you want to use that. I tried to design it to minimize the need for support, but some will probably be needed for the guns.
The rear gun is a tight fit and may need some filing or drilling out a bit to get it just right.
This was modeled in Solidworks