1 / 4
Savonius wind turbine
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on different scientific papers I created this Savonius two blade shape wind turbine design.
- Ocena
- 3 / 5
- Polubienia
- 59
- Pobrania
- 398
- Wydruki
- 2
- Wyświetlenia
- 5045
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (0)Kolekcje (82)Powiązane
Based on different scientific papers I created this Savonius two blade shape wind turbine design. It is specifically designed to work well with low wind speeds coming from one direction.
The turbine needs a obstacle wall in front of the blade that comes back in order to increase momentum. I created a case for this turbine with obstacle and deflector walls as well as a wind tunnel. I will link to the files as soon as I have tested them.
Notes:
- The blades are higher on the ends to compensate for the bending when fastening the brass nuts. Maybe some additional grind is required to get a perfect fit without unwanted blade bending.
Additional materials for this design:
- 1 x T8 lead screw
- 2 x brass nuts
- 8 x M3 screws
Edit:
- The design is to heavy for a light breeze. You need to reduce the fly wheel weight (bottom & top plate thickness) and also reduce the blade thickness - additionally you could print it with foam filament.