Tail Company MiTail Wall Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall hook for The Tail Company MiTail animatronic tails.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 499
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall hook for The Tail Company MiTail. Allows tails to be hung on a wall or flat vertical surface.
In addition to the hook, you will need two #8 or M4 flat countersunk head screws of sufficient length. (In the photo example mounted directly to a 2x4, a 1 ½ inch screw length was used.)
NOTE: I am NOT responsible for your walls, screw it into the wood studs, and not the drywall, electrical or plumbing! The use of drywall anchors is not recommended.
This mount is not specifically designed to be used to hold the tail while it is animating. Practice responsible wagging, and consider risks to your walls, tail, and surrounding objects!
The Crumpet logo is used with the generous permission of The Mechanical Tail Company Ltd.