Cache Pot Twisted, Pentagonal, Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cache pot was made by playing with rounded, twisted pentagonal shapes and "linear_extrusion" in OpenSCAD.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 488
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
This cache pot was made by playing with rounded, twisted pentagonal shapes and "linear_extrusion" in OpenSCAD. The height is set to 12cm but you may choose different heights, ratios and twist rates but please check for manifold if you change too much.
Print instructions
Print Settings
Printer brand: Prusa
Printer: i3 MK2S
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.15mm
Infill: 20%
Filament_brand: any
Filament_color: woodfill
Filament_material: PLA (woodfill or bamboo)
Post-Printing
With the recent values it will need support for printing so some sanding will be necessary when the support is removed. If you want to ensure it is waterproof, you will probably need to apply appropriate coating.