Dreamcatcher lightstick table clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Table clamp holder for official Dreamcatcher lightstick.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Table clamp for official Dreamcatcher lightstick.
Made as an extension and modification of Modular Desk Mount.
Currently made for 22mm thick table. Adjustments should be simple enough to make in 3D builder or I can adjust table clamp for different thickness table.
Other lightsticks can be accomodated as well but I would need to know the diameter of the handle to make adjustments. For this version its 31mm.
Parts should be in the correct orientation for printing. No supports required.
PLA is good enough material for this. Tolerances can be a bit tight if they are try a bit of sanding or just forcefully put parts together.