Coffee funnel for 57mm porta filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a funnel similar to the aluminum ones, for a 57mm portafilter (Lelit and Ascaso espresso machines mainly use…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a funnel similar to the aluminum ones, for a 57mm portafilter (Lelit and Ascaso espresso machines mainly use them).
The sizes are optimised for a 0.6 nozzle but should print fine using 0.4. if you want a 0.4 optimised one ask me for it and I will upload it.
The 3 holes are for 3mmx1mm magnets. You can glue them in there so it snaps into place and you don't have to hold it on the portafilter.
Print Settings
Printer:
Voron 1.8
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
15%
Filament:
PETG preferably as PLA might melt if you leave it on a hot portafilter for a long time
Fire engine red
Category: Kitchen & Dining