1 / 1
FGC-6 MKI/MKII s, AF, H: UNW 227, 300, 370 Outer barrels set — zdjęcie 1

FGC-6 MKI/MKII s, AF, H: UNW 227, 300, 370 Outer barrels set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2023 version

Ocena
0 / 5
Polubienia
6
Pobrania
59
Wydruki
0
Wyświetlenia
421
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

02-06-2025

UNW-T6 outer barrel options added

---

as part of the big V24 update. the 14mmccw barrels have been made a bit stronger

 

-

  • 14mm CWW barrel tips have been added ---

these are the 2023 versions of the Outer barels for the FGC6 MKI/MKII (s, FA, H) platform. this barrel will have a tighter Inner diameter size at the tip of the barrel. this will act like a inner barrel stabiliser so in other words it prevent it form moving around.

but before you select and print a outer barrel. make sure that your FGC6 is working correctly. and take a close look at the barrel adapter that you use.

the file naming works as fallows: 
227 slim barrel 00mm 9 18mmID
(227 slim = shroud model) (barrel = what type of barrel) (00mm = inner barrel hight) (9 18mmID = inner barrel OD size)

-
this outer barrel is made to work with the fallowing models:
for the FGC-6 MKI
FGC9-MKI UNW227 shroud
https://www.printables.com/model/176667-fgc9-mki-unw227-shroud

FGC9-MKI UNW300 shroud
https://www.printables.com/model/176689-fgc9-mki-unw300-shroud

for the FGC-6 MKII
FGC9-MKIISD UNW227 shroud
https://www.printables.com/model/159946-fgc9-mkiisd-unw227-shroud

FGC9-MKIISD UNW300 shroud
https://www.printables.com/model/160191-fgc9-mkiisd-unw300-shroud

FGC9-MKIISD UNW370 shroud or for the FGC6 MKII
https://www.printables.com/model/259144-fgc9-mkiisd-unw370-shroud-or-for-the-fgc6-mkii

-

materials needed:
shroud
4x M3 washer
4x bolt m3 35mm or 40mm long


suppressor 
2x bolt m2,5 18mm or 20mm long

3 piece barrel
1x M3 16mm long

-

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…

Tagi