1 / 4
Dremel Tool Rack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Specs. Creality Cr10 V3 Mod. with E3D Hemera Revo Hotend Simplify3D ver.5 Filament GST3D PLA+ Print Time 11 hours…
- Ocena
- 5 / 5
- Polubienia
- 229
- Pobrania
- 562
- Wydruki
- 6
- Wyświetlenia
- 3556
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 6)Remiksy (0)Kolekcje (336)Powiązane
My Specs.
Creality Cr10 V3 Mod. with E3D Hemera Revo Hotend
Simplify3D ver.5
Filament GST3D PLA+
Print Time 11 hours 34 minutes
Print Speed.
inner Perimeter 80 mm/sec
Outer Perimeter 60 mm/sec
Infill Speed 100%
Bottom Solid Layer 3
Top Solid Layer 4
Outline Perimeters (wall ) 2
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
5%
Filament: any any any Post-Printing =============
Category: Tool Holders & Boxes