Lever for Franke Sink Waste opening / closing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lever for Franke Sink Waste opening / closing.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a lever for Franke Sink Waste opening / closing. Original lever got broken one day so I reconstructed the part based on the original broken part. Works like a charm.
Print instructions
I printed the prototype in PETG 20%, only 15% infill. It haven't been broken yet but I recommend to do 100% infill since this is mechanically forced part and could get easily broken.
I haven't tested if boiling water destroys or significantly deforms the part in case some hot water is briefly poured into the sink. In case this is a problem, we could use ASA or some more heat resistant material.