1 / 2
Grommet for 1/2 inch (0.5"/ 12.7mm) Thru Hole [Cable Pass Through] thin sheet — zdjęcie 1
1 / 2

Grommet for 1/2 inch (0.5"/ 12.7mm) Thru Hole [Cable Pass Through] thin sheet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small wire/tube grommet ideal for 1/16" thick / 1.6mm thick Sheetmetal. ID: 0.4"/ 10mm

Ocena
5 / 5
Polubienia
27
Pobrania
247
Wydruki
1
Wyświetlenia
1215
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

I needed a wire grommet to protect a small DC Power port cable that needed to come through my Sheetmetal backboard to my LED Worklights on my workbench, so this was born.

Originally designed in Inventor.  I exported it in STEP and STL in case you need to modify this for your needs (larger thru hole, thicker plate, etc)

Printed with the flange face down, minimal supports to support the retention /interference features.  I'd recommend at least 3 walls.  PLA works great

Tagi