Angled Camera Mount for 3030 aluminum (designed for RatRig)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your camera to the side but at an angle so it's still looking directly at the middle of the build plate.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 509
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
A 10 minute design to mount your camera to the side of your enclosure, but with an angle so it's still facing the middle. It can be mounted upside down to switch the direction. Angle is 30 degrees. Included .f3d and .step so it can be modified.
NOTE: Supports required for printing but they are super easy to remove
NOTE: I found out trying to mount upside down in my RatRig V-Core-3 that the printhead will crash into it when the print head goes to the front (for instance, for Z-tilt compensation). So don't plan to use upside down without checking clearances.