1 / 3
Ashen Key Prop Inspired by Sea of Thieves
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print Ashen Key from SoT, designed to fit in your hand the way it fits in you pirate's hand!
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 332
- Wydruki
- 3
- Wyświetlenia
- 1231
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (46)Powiązane
Easy to print Ashen Chest Key from Sea of Thieves (SoT)
Three versions of the model is available to print:
- AshenKeyFlatBottom is for FDM printing, bottom is flat so no supports needed and it prints fast at 45 minutes at 0.2mm
- AshenKeyForResin is for resin printing, model is mirrored down the middle so it requires supports
- AshenKeyResinLeft/Right is two parts for FDM printing, can print each side and glue them together to get a result similar to the above resin model
I didn't want to pay $3 for a model someone else made, so took two hours and made my own. Was it harder than just buying the mode? Yes. Do I have any regrets? No, well a few, but not related to this. If you print and paint it please share cause I suck at painting and wanna see how it's done, happy printing!