1 / 2
FGC-6 MKI/MKII: honeybadger, MS Medium shroud, LS long shroud, Outer barrels set — zdjęcie 1
1 / 2

FGC-6 MKI/MKII: honeybadger, MS Medium shroud, LS long shroud, Outer barrels set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2023 version

Ocena
0 / 5
Polubienia
12
Pobrania
94
Wydruki
0
Wyświetlenia
685
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

as part of the big V24 update. the 14mmccw barrels have been made a bit stronger

 

-

  • 14mm CWW barrel tips have been added ---

these are the 2023 versions of the Outer barels for the FGC6 MKI/MKII (s, FA, H) platform. this barrel will have a tighter Inner diameter size at the tip of the barrel. this will act like a inner barrel stabiliser so in other words it prevent it form moving around.

but before you select and print a outer barrel. make sure that your FGC6 is working correctly. and take a close look at the barrel adapter that you use.

the file naming works as fallows: 
227 slim barrel 00mm 9 18mmID
(227 slim = shroud model) (barrel = what type of barrel) (00mm = inner barrel hight) (9 18mmID = inner barrel OD size)

-
the inner barrel max size
Long shroud, honey badger = 260mm max
medium shroud = 249mm or 220mm in the short setup


_

this outer barrel is made to work with the fallowing models:
for the FGC-6 MKI
FGC 9 UNW Long Shroud
https://www.printables.com/model/87909-fgc-9-unw-long-shroud

FGC 9 UNW Long Shroud V2
https://www.printables.com/model/87900-fgc-9-unw-long-shroud-v2

FGC 9 UNW Long Shroud V3
https://www.printables.com/model/87899-fgc-9-unw-long-shroud-v3

FGC 9 UNW No rail Long and medium Shroud
https://www.printables.com/model/87894-fgc-9-unw-no-rail-long-and-medium-shroud

FGC 9 UNW Medium Shroud
https://www.printables.com/model/87901-fgc-9-unw-medium-shroud

for the FGC-6 MKII
FGC9-MKIISD UNW honeybadger shroud
https://www.printables.com/model/217724-fgc9-mkiisd-unw-honeybadger-shroud

FGC9-MKIISD LS SHROUD set
https://www.printables.com/model/90572-fgc9-mkiisd-ls-shroud-set

FGC9-MKIISD MS SHROUD set
https://www.printables.com/model/90325-fgc9-mkiisd-ms-shroud-set
-

materials needed:
shroud
4x M3 washer
4x bolt m3 35mm or 40mm long

suppressor 
2x bolt m2,5 18mm or 20mm long

-

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…

Tagi