Prusa LCD-Screen hanger (quick mount/unmount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this screen holder for mounting the LCD screen on the front of an enclosure.
- Ocena
- 4,5 / 5
- Polubienia
- 9
- Pobrania
- 67
- Wydruki
- 2
- Wyświetlenia
- 921
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I designed this screen holder for mounting the LCD screen on the front of an enclosure.
The design consists of two modified LCD-supports and one plate you screw to the face on which you want to mount the LCD.
Then you can just slide the LCD on and off at will.
Print instructions
LCD-supports: Original Prusa LCD-supports are printed in Petg so I also recommend this for the replacements.
0.2 mm layer height, infill 20% GRID
You need two of these, of which one needs to be mirrored.
Hanger plate: Can be printed in either PLA or PETG but i do recommend printing it with 100% infill.
0.2 mm layer height, infill 100%