MMU2S Filament Buffer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament buffer to have the least amount of parts and improved wheel.
- Ocena
- 4,714 / 5
- Polubienia
- 217
- Pobrania
- 909
- Wydruki
- 16
- Wyświetlenia
- 11 796
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Filament buffer to have the least amount of parts and improved wheel. The stands can be attached to the base using M3-10 screws, while everything else just slides in place. If needed a a small dab of CA on the ends will help secure the stands to each other.
Print instructions
You will need to print:
6X Stands
1X Base Plate
5X Wheels
You will also need:
12X M3-10 screws
You will need supports on the Wheels, but will not need supports anywhere else. The parts printed fine with PETG and seems to function alright. Print at 0.2mm layer helight at 15% infill.
(Optional) Be warned that this will make it a permanent installation. You may want to dab a little bit of CA (Super Glue) on the ends of the stand, and also on the ends of the 4mm PTFE tube.