Ender 3 S1 Pro Z Axis Brace Project
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Z axis brace to improve quality and higher printing speeds.
- Ocena
- 4,5 / 5
- Polubienia
- 126
- Pobrania
- 488
- Wydruki
- 3
- Wyświetlenia
- 4847
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I've fixed the crew hole on the bottom pieces to make sure that the original screws fit. (The original model requires longer screws)
I also added a mirrored version of the bottom piece so you don't have to do that in your slicer anymore.
There is also a second version for the left bottom piece, which also includes a mounting option for the Articulating Raspberry Pi Camera.
I've tested this on a Ender S1 Pro without the linear rails mod that the original creator used and it work fine. Personally, I had to decrease my max z-height to 248 to make sure that homing on the x axis was still possible. But this is probably caused by some other mods I've done to the printer. Please measure this yourself.