iPhone 13 TPU Case with Thick Sides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of an iPhone 13 TPU case with extra padding for the corners and back.
- Ocena
- 4,667 / 5
- Polubienia
- 32
- Pobrania
- 560
- Wydruki
- 3
- Wyświetlenia
- 2228
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a new case for my iPhone 13. Having looked at the available options, I was not happy, so I looked for one that should be easy to modify to fit my needs. I found the “IPhone 13 tpu case” by Majszczur, and remixed it to fit my needs:
- Thicker back side - The original have a 1.4mm thick back, which is not enough for the camera bump. I added an extra 1mm extra, which helps to protect the camera bump.
- Extra padding for the corners - the original have a fixed 1.4mm all around, which might not provide enough protection when dropped on a side. I have added an extra 2mm for all of the corners. This also help a bit to grip the phone better.
After printing I had a bit of an issue to press the power and volume buttons; but this was fixed by using a thin knife to carefully cut along the top and bottom of the buttons (making them a bit more flexible).
Mine is printed on eSun eTPU Transparent Blue.
My print settings:
- 10 Perimeters
- 0.2mm Layer heights
- 0 Top Layers
- 2 Bottom Layers
- Honeycomb Fill Pattern (15%)
- Supports where required
I specially wanted a visible infill that will look good and provide some extra shock absorption.