Modular EDC tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a little EDC/catch all tray that can be fully customized to whatever suits your needs!
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 133
- Wydruki
- 2
- Wyświetlenia
- 1102
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a little EDC tray, where you can print exactly and only the parts and compartments you need because they all fit into eachother! To assemble, you just slide them into each other.
The basic “unit” (the 1x1 compartments) is 60 x 60 x 20 mm on the inside. The bigger trays are named according to how many 1x1 units they cover.
I also added a little backside where you can put the backside-hooks into the holes to create space for whatever you need, for example i used 2 of these hooks to make a nice little display for a knife but they can also be used to hang your keys and anything else really.
The different file names can be quite confusing so here's a little guide if you feel a bit lost:
- 1x1, 2x1, 3x2 numbers - how big the compartment is
- blank - just a box with nothing special added
- charger - has a hole for a charger (3x2 for your phone, 1x1 for an airpods case)
- slide - has a chamfer on one of the sides to make it easier to take stuff out - long x short tells you what side the chamfer is on (long - on the longer side and vice versa)
- window - has a cutout out the side to also make it easier to take stuff out
(If you have a smaller printer like I do, it all should work on 80% size which I've found also fits on a Prusa MINI bed, though some compartments might be a bit too small for the intended obect to fit)