Caribou3d Y-rod holder with cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: v3 had an issue with not enough space for M6 washer, v4 is corrected so it can now house a screw and a washer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE: v3 had an issue with not enough space for M6 washer, v4 is corrected so it can now house a screw and a washer.
Y-rod holder with cap for 3030 Caribou3d mod.
This is a work in progress - a prototype.
Uses 2x M6x14 screws with M6 washers (11.6 mm OD) and insertion nuts to fasten down the holder to a profile and 2x M3x14 with M3 washers (up to 7.1 mm OD) and M3 square nuts to fasten the cap to the holder.
Print instructions
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: Yes
Resolution: 0,2
Infill: 20-30
Notes:
Rotate the cap 180° X or Y so you don't have to use supports on this part.
Supports are recommended on the inset of the holder.