Hex Key Case with Retainer (Metric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of your Hex Keys falling out of your case, then print this case that has a filament retainer
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 317
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This Hex Key Case is ideal for a 3D printer tool kit. You just print the case and slide a piece of filament (TPU is best then PETG otherwise you can use PLA) into the hole provided and your hex keys will stay put until you need them. It provides just enough resistance to hold the hex keys, but you can still easily pull them out and put them back.
Will hold sizes: 5mm, 4mm, 3mm, 2.5mm, 2mm, 1.5mm keys
Printing
Bottom on build plate
Filament - PLA, PETG
Infill - 15% is good
Layer Height - .20mm
Supports - None
Parimeters - 2-3
Additional Parts - None
Bed Adhesion - You may want some glue stick to ensure good bed adhesion.
Rafts - You may need a brim to help with bed adhesion
Scaling - None
Filament Change - None
Post Printing Notes: None
Happy Printing!
You can help
To help cover the expenses of printing prototypes for the models I share, please consider a donation by purchasing an item from my Amazon wishlist here
Here are my other similar models related to Tools
printables search – Tools @HandyHandcrafts
Please leave a comment and let me know how you like this model.
Also, if you like this model, check out my other models over here:
https://www.printables.com/social/130916-hendersons-handcrafts/models
Award winning Model “Japanese Toolbox” for the "Box Contest: here:
https://www.printables.com/model/260100-japanese-toolbox-inspired-locking-lid-box
Below are just few of my other models |
 |